ÉireComposites gets a new state of the art gas-fired oven.

15/09/2017 ÉireComposites has recently commissioned a brand new, state of the art 660 kW gas-fired oven. The new oven will increase productivity and efficiency. At 16 meters long and with a usable width and height of over 4 and 3 meters respectively, the oven is ideally suited for making long and large section composite structures. Read more about ÉireComposites gets a new state of the art gas-fired oven.[…]

ÉireComposites involvement in Ireland’s Space Odyssey

  ÉireComposites appeared in the Sunday Business Post on the 6th of August 2017 in an article entitled Ireland’s Space Odyssey. The article highlighted successful Irish companies working in the space sector and briefly discussed the impact of the sector on the Irish economy.   It pointed out that for every euro invested in the Irish Read more about ÉireComposites involvement in Ireland’s Space Odyssey[…]

ÉireComposites attended the Digital Ocean Conference

Tomás Flanagan, R&D Director at ÉireComposites, spoke recently at the Digital Ocean Conference which was held in conjunction with Seafest 2017.  He presented ÉireComposites’ work on tidal turbine blades and offshore wind turbine blades within the context of the EU-funded MarinComp,  FloTEC, and PowderBlade projects.  The conference session also included presentations from SEAI, the MaREI Read more about ÉireComposites attended the Digital Ocean Conference[…]

ÉireComposites to lead €2.7m wind turbine blade R&D project

The PowderBlade project aims to modernise the production of large-scale wind turbine blades by delivering a major innovation to their manufacturing process.The project kicked off at ÉireComposites’ factory in Galway in December 2016 with a meeting of project partners from Suzlon (The Netherlands), The University of Edinburgh, and WestBIC (Galway). For the past number of Read more about ÉireComposites to lead €2.7m wind turbine blade R&D project[…]

ÉireComposites Receives Supply Chain 21 Award

ÉireComposites received a SC21 award on March 16th 2016. The award reflects a lot of hard work by the company’s manufacturing and quality departments focused on defect elimination and more efficient logistics. It is an endorsement of the quality and on-time delivery associated with ÉireComposites’ aerospace parts. The award was presented in Dublin during the SC21 Task Force Conference which was attended by companies from across the UK and Ireland.

ÉireComposites wins JEC 2016 Innovation Award

An equestrian saddle developed by ÉireComposites and its partner BUA saddles won the JEC Innovation Award for sports and leisure. The saddle promises greater comfort for both horse and rider, enabling both of them to move freely and without effort, whether the horse is walking, trotting or galloping. The cantilevered tree is made from a thermoplastic composite material, making an economical, water resistant, lightweight (weighing just 4kg, 6kg less than traditional saddles) robust saddle. The award was presented to Kenneth O’Toole from ÉireComposites at the JEC Conference in Paris on March 8th 2016.

ÉireComposites to Build Blades for 2MW Floating Tidal Device

ÉireComposites has been granted €0.5 million as part of the €10m FloTec Tidal energy project which is being led by ScotRenewables. ÉireComposites scope is to develop higher performance tidal turbine blades at an affordable cost. The strategic objective is to increase the availability of secure, low-cost, low-carbon electricity from ocean and offshore energy. These objectives will be achieved by using a novel, but commercially proven, manufacturing process for composites.

ÉireComposites Begins Development of 14m Wind Blades

ÉireComposites has commenced development of 14-metre wind-turbine blades for a UK-based company. The blades will utilise ÉireComposites’ patented technology for composites’ manufacturing. The technology reduces the cost and weight of blades while increasing the strength and stiffness. Most wind blades are made by gluing sub-components (skins, spar, root etc.) together while ÉireComposites’ blades are manufactured in a single piece, thus eliminating the cost and weight associated with gluing parts together and enhancing blade quality. The 14m blades will be used for a derivative of the Vestas V29 wind turbine, a 225kW machine. The V29 is one of the first pitch-regulated turbines and has an excellent track record in terms of reliability.

ÉireComposites Space Project Achieves Key Milestone

ÉireComposites has completed structural testing of a scaled demonstrator, thus reaching a key milestone in the Future Launchers Preparedness Program (FLPP) project. The European Space Agency (ESA) has provided €1.9m towards the project and the resulting 0.5m cylindrical demonstrator was manufactured from high-performance thermoplastic composite material using the state-of-the-art Automated Tape Placement (ATP) process.

ÉireComposites Awarded €1.9 million in ESA R&D Projects

Galway company, ÉireComposites Teo. today announced that it has been awarded a total of €1.9 million in Research and Development contracts from the European Space Agency, aimed at producing new lightweight composite technologies for future space launcher and satellite structures. These contracts will create 3 new graduate engineering positions at the company – which is supported by Údarás Na Gaeltachta – and support 7 more engineering and technician positions. The company already employs 55 people in a state of the art facility for lightweight aerospace and renewable energy products in Indreabhán, Co. Galway.